Night Owl 9/Night Owl CD-ROM (NOPV9) (Night Owl Publisher) (1993).ISO/041a/galler14.zip/GALLERIA.HLP

OS/2 Help File | 1993-04-13 | 35KB | 1,000 lines

ΓòÉΓòÉΓòÉ 1. Copyright ΓòÉΓòÉΓòÉ

                                    Galleria

                            Copyright (c) 1992, 1993


                          Bitware, Software & Services
                                  P.O. Box 3097
                              Manuka  A.C.T.  2603
                                    Australia

                               Fax:  [phone]
                             CompuServe:  100033,340


                               All rights reserved


ΓòÉΓòÉΓòÉ 2. Description ΓòÉΓòÉΓòÉ

Galleria is a general purpose tool for the management of bitmapped images. It
provides a window for the display of bitmaps at varying resolutions. Bitmaps
can be read from the OS/2 clipboard or from disk in numerous formats. Once
loaded, the displayed image can be edited (cropped, resized, rotated etc.) and
converted to monochrome or grayscale. The result can be transferred to other
applications via the clipboard or saved on disk in a different format. High
quality printed output can also be generated.

Galleria supports a file search function to list all bitmaps available. Also, a
multi-level undo capability is provided to reverse previous edits. Concurrent
operation of most tasks (such as display, conversion, file save and printing)
is possible due to OS/2's multi-threading capability.

Galleria supports all common bitmap file formats including BMP, PCX, TIFF and
GIF. Kodak Photo-CD format is also supported for import. Refer to Supported
file formats for a list of supported file formats (for import and export).

Refer to Galleria/CM support for instructions on integrating this program with
Galleria/CM for immediate post-processing of images captured from the desktop.

Refer to How to register for license and registration information.


ΓòÉΓòÉΓòÉ 3. Instructions on use ΓòÉΓòÉΓòÉ

Galleria is designed to perform edits and conversions on existing bitmapped
images. These bitmaps are sourced from disk files or the clipboard. If you are
using Galleria/CM, a snapshot of the desktop can also be used.

A normal session involves the following three stages:

o First, load the original bitmap. If not pre-loaded by Galleria/CM, open a
  disk file (with File open or File search) or Paste in the current image from
  the clipboard.

  Refer to Supported file formats for a list of bitmap file formats currently
  supported for import.

o Once loaded, the image can be edited and/or converted as required.

  Use the Image pull-down menu to select the desired edit operation.
  Alternatively, click the right mouse button anywhere on the image to popup a
  list of the most common edit operations. The displayed image will be updated
  to reflect the cumulative result of all edits. Use Undo to revert to the
  state prior to the last edit (conditional on the Undo levels setting).

  The image can also be converted to monochrome (black and white), grayscale
  (evenly spaced shades of gray) or color (with a standard or reduced palette).
  Selecting a conversion from the Convert pull-down menu will result in the
  current image being converted. All conversions are applied to the original
  image palette.

o When all edits and/or conversions are completed, the displayed image can be
  saved to disk (with the File save or File save as) or placed in the clipboard
  (with Copy) for transfer to another application.

Galleria can process images with up to 256 colors (8-bit color) but display of
these colors will be governed by the display/driver capability. In cases where
the image palette differs from the default palette set by Presentation Manager,
image colors will be translated to the closest displayable. Check with the
supplier of your video display adapter/driver for Palette Management support.

To view images with more (or different) colors than supported, dithering can be
applied to use only those colors from the standard VGA palette. For best
results, enlarge the image to 2 or 3 times the original size, then apply the
error diffusion color conversion.

Note that Galleria optimizes the image palette by discarding unused or
duplicate entries. The actual number of colors used in the image is displayed
in the information area at the bottom of the window. Files saved by Galleria
may be smaller as a result of this palette optimization.

Refer to the online help for detailed descriptions on use of all aspects of
Galleria. Remember that pressing F1 while pull-down menus are active will
display help for entries in that menu.


ΓòÉΓòÉΓòÉ 4. File menu ΓòÉΓòÉΓòÉ

Use the File menu to transfer images to/from disk, search for images on disk or
print the current image.

o New will replace the current image. A dialog box is displayed prompting for
  the new image size and fill color. These are normally used as a base for
  subsequent Merge operations.

o Open is used to load a new image from disk. A dialog box is displayed
  prompting for the name of the file to be read from disk.

o Search is used to search a number of disks for files matching the specified
  name or partial name. A dialog box is displayed prompting for disks to be
  searched and the file name to be found.

o Save will save the current image to disk. The image will be written to a file
  with the original file name and format or those used for the last save
  operation. The current conversion options will be applied prior to the save.
  The undo stack will also be cleared.

  Note that not all read files can be saved in the same format. If no output is
  possible for the format, this option will be disabled. Use Save as to save
  with a supported format.

o Save as will display a dialog box prompting for a new file name and/or format
  prior to saving to disk as in the Save operation above.

o The List options are available when multiple files are selected with the File
  open and File search dialogs. These enable positioning within the list of
  files selected. The buttons in the information line can also be used to
  scroll up/down the list.

  An Auto show option exists to automatically show each image in the list in
  turn for the time set in the Preferences dialog. When using Auto show, images
  unable to be loaded will be skipped. Also, when the end of the list is
  reached, display will wrap around to the beginning of the list.

  To start Auto show of the listed files with a full screen display, type
  Ctrl-F-W. Pressing any key or clicking the left mouse button will abort both
  full screen display and the Auto show facility.

o Print will print the current image to a specified printer. A dialog box will
  be displayed prompting for destination and print options.

o Preferences is used to display or change preferences. A dialog box is
  displayed permitting a number of operational settings to be changed.


ΓòÉΓòÉΓòÉ 4.1. File new ΓòÉΓòÉΓòÉ

The File new dialog is displayed to prompt for dimensions and fill color for a
new image.

Overtype the horizontal and vertical dimensions to set the new image size.

Select the fill color for the new image.

New images of the size and color specified can be used as a base or border for
images merged from the clipboard.

Press OK to create a new image with the specified dimensions and color or
Cancel to ignore changes and exit with the current image unchanged.


ΓòÉΓòÉΓòÉ 4.2. File open ΓòÉΓòÉΓòÉ

The File open dialog prompts for the names of bitmap files on disk to be read
and displayed.

The path to a file is represented by a Disk, Directory and File name. Select
the desired disk and/or directory and all files matching the current mask will
be listed.

Edit the file name and press Open. Alternatively, double click on a name from
the list.

To select multiple files, click on the desired file names from the list and
press Open. Press All to select all listed files in the designated directory or
None to select none. The number of files currently selected is shown.

The files listed for the current disk and directory can be restricted by
entering a mask. The "*" and "?" wild values can be specified. Normal search
rules apply with the exception of file extension: when no extension is
specified (eg. *, b* or boat), only those files with extensions predefined in
the File extensions dialog will be listed. To list files with a specific
extension, include this extension in the name (eg. *.bmp). To list all files,
regardless of extension, enter *.*.

A history of previous file names or masks specified can be accessed by
selecting the drop-down arrow at the right of the file name/mask field.

Press Extensions to display or update the list of file extensions to be
included in the file list when none is specified.

Press Open to list all files matching the current mask, or open the file when
fully specified.

Press Cancel to exit the dialog with the current image unchanged.


ΓòÉΓòÉΓòÉ 4.3. File search ΓòÉΓòÉΓòÉ

Use the File search dialog to search a number of disks for files matching a
full or partial file name. All directories on the selected disk(s) will be
searched. When the required file is found, the remainder of the search
operation can be aborted.

Select the Disks to be searched from the list box. Multiple disks can be
targeted for the search.

Enter a full or partial file name in the Name/mask field. Wild characters "*"
or "?" can be specified. When no extension is provided, only those files with
extensions matching those in the File extensions dialog will be listed.

Press Start/Stop to initiate/terminate the search.

Press Open to terminate the search and open the file selected from the list.
Alternatively, double-click on the desired file name.

To select multiple files, click on the desired file names from the list and
press Open. To select all files listed under a directory name, click on the
directory name in the list. Press All to select all listed files regardless of
directory or None to select none. The number of files currently selected is
shown.

Press Extensions to invoke the File extensions dialog to select file extensions
for the search.

Press Cancel to terminate the search and leave the current image unchanged.


ΓòÉΓòÉΓòÉ 4.4. File save ΓòÉΓòÉΓòÉ

The File save dialog prompts for the name to be used for the image when saved
to disk.

The path to a file is represented by a Disk, Directory and File name. Select
the desired disk and/or directory and all files matching the current mask will
be listed.

Edit the file name and press Save. Alternatively, double click a a name from
the list to overwrite an existing file.

The files listed for the current disk and directory can be restricted by
entering a mask. The "*" and "?" wild values can be specified. Normal search
rules apply with the exception of file extension: when no extension is
specified (eg. *, b* or boat), only those files with extensions predefined in
the File extensions dialog will be listed. To list files with a specific
extension, include this extension in the name (eg. *.bmp). To list all files,
regardless of extension, enter *.*.

Press Extensions to display or update the list of file extensions to be
included in the file list when none is specified.

Press Save to list all files matching the current mask, or save the file when
fully specified.

Press Cancel to exit the dialog without saving the file.


ΓòÉΓòÉΓòÉ 4.5. File save as ΓòÉΓòÉΓòÉ

Use the File save as dialog to save the current image to disk with the file
name and format specified.

Select the desired file format from the list displayed. The file name extension
will be changed to the default for that format.

Specify the file name of the output file. When not specified, the current
directory will be assumed.

Press Save to save the file on disk with the specified name and format.

Press List to browse files in the current directory or change the output disk
and/or directory. Ensure that the desired file format is correct before
proceeding.

Press Cancel to terminate the dialog without saving the file.


ΓòÉΓòÉΓòÉ 4.6. File extensions ΓòÉΓòÉΓòÉ

Use the File extensions dialog to display or update the relevant file name
extensions to be listed when none is specified in the File open, File search
and File save dialogs. (Note that file list/search times can be reduced by
eliminating extensions not required.)

The list of file name extensions together with an optional short description is
displayed.

Press Add to add a new entry. Fill in the file name extension (maximum of three
characters) and an optional description and press OK.

Press Change to change the currently selected entry. Overtype the file name
extension and/or description and press OK.

Press Delete to delete the currently selected entry.

Press OK to accept these changes or Cancel to ignore any changes and exit with
the original entries.


ΓòÉΓòÉΓòÉ 4.7. Metafile options ΓòÉΓòÉΓòÉ

The Metafile options dialog is displayed when a file with extension .MET is
opened. OS/2 metafiles (as vector files) are scalable and importing these files
requires conversion to bitmap format.

Specify the Background color and Size for the resulting bitmap. To change the
size of the image, better resolution will result by re-opening the metafile
with a different size than subsequent use of the Enlarge/reduce edit option.

Press OK to open the file or Cancel to abort the open.


ΓòÉΓòÉΓòÉ 4.8. File print ΓòÉΓòÉΓòÉ

The File print dialog is displayed prior to a print operation to enable options
for the current print to be changed.

Specify the Queue for the print. The default printer, form etc for this queue
will be used.

A choice of low, medium and high resolution can be set to control output print
quality, with high resolution offering maximum quality.

Select a Border percentage to leave a blank edge along all sides of the page.
The value specified is a percentage of the page width and height.

Select the Area percentage to limit the output size. The value specified is a
percentage of the total page area. Note that the image printed may be smaller
in area than that specified if it would otherwise overlap the border above.

For fine tuning the output, the relative Color bias percentages can be changed
to lighten/darken areas of the image depending on the red/green/blue intensity
of the original. A higher bias will result in a lighter tone for areas of that
color. Additionally, the overall intensity can be changed by setting the
desired Brightness. Position the slider arm at the desired position.

Select Sharpen to print more clearly defined lines and edges at lower
resolutions.

The Color option will generate color output for printers (with appropriate
drivers) supporting this capability. This option can also be selected for
monochrome printers and may generate more acceptable output for some
driver/printer combinations.

Press OK to start printing with the options selected or Cancel to ignore
changes and abort the current print operation.

Note that the current conversion setting is ignored when printing. The image
will be printed using the original (or edited) palette if the Color option is
selected, otherwise automatically converted to monochrome.


ΓòÉΓòÉΓòÉ 4.9. Preferences ΓòÉΓòÉΓòÉ

Use the Preferences dialog to display or change personal preferences for use of
Galleria.

Choose between Standard or Alternative file dialogs. See Alternative file
dialogs for a discussion on why you may wish to choose these non-standard
dialogs.

Set the desired level of information to be displayed in the window title.
Either No name, Full path name or Path name only can be selected.

Set the Window size option to determine whether or not the window size should
be changed to fit the loaded image. This option applies when the bitmap is
first loaded only. Note that the window will not be resized if currently
maximized.

The RGB translation setting applies to imported bitmaps with greater than 256
colors (eg. 16 and 24-bit color). When first loaded, such images can be reduced
to either 16 or 256 colors using dithering. No translation (ie. retention of
the full color spectrum) is not yet supported. Note that translation will cause
bitmaps with greater than 256 colors to take longer to load.

Set the Auto show interval to determine the (approximate) minimum time each
image is to be displayed when using the Auto show facility.

Press OK to apply the selected preferences or Cancel to ignore changes.


ΓòÉΓòÉΓòÉ 5. Photo menu ΓòÉΓòÉΓòÉ

Use the Photo menu to control display of the Photo CD overview window or set
Photo CD import options.

Select Open/refresh to display a window containing thumbnail views of all
images on the Photo CD. If already displayed, the overview contents will be
refreshed.

To load a Photo CD image, double click on the thumbnail view in the window
displayed. An image can be selected prior to all thumbnail views being
displayed.

Select Show to restore the Photo CD overview window after it has been
minimized/hidden. Close will close the Photo CD overview window.

Use Disk to select the id of the disk representing the desired Photo CD to be
used for the Open/refresh action above.

Select Options to display the Photo CD options dialog to preset import options.
Display of this dialog when a Photo CD image is loaded can be controlled with
the Prompt for options setting.


ΓòÉΓòÉΓòÉ 5.1. Photo CD options ΓòÉΓòÉΓòÉ

The Photo CD options dialog is displayed when a file with extension .PCD is
opened. Photo CD files are stored in a number of resolutions (sizes).

To display such images more quickly, only the grayscale component may be read.

Select the desired Resolution and Grayscale option and press OK to open the
file. Press Cancel to abort the open.


ΓòÉΓòÉΓòÉ 6. Edit menu ΓòÉΓòÉΓòÉ

Use the Edit menu to transfer images to/from the clipboard.

The following operations apply to clipboard operations:

o Copy places the current image in the clipboard. The clipboard can be used as
  either a temporary storage area or to facilitate transfer to another
  application. The clipboard copy will be converted as per the current
  conversion settings.

o Paste copies the bitmap from the clipboard and replaces the current image.

o Merge merges the bitmap in the clipboard with the current image. A
  size/position rectangle will be displayed to control placement of the image
  from the clipboard.

  Position the top left corner of the size/position rectangle and press the
  left mouse button, then stretch the rectangle to the desired size and press
  the left mouse button again. The Merge operation can be aborted by pressing
  the Esc key.

o Peek displays the current clipboard contents prior to a Paste or Merge
  operation.

o Empty clipboard will clear the current clipboard contents.


ΓòÉΓòÉΓòÉ 6.1. Edit peek ΓòÉΓòÉΓòÉ

Use the Edit peek dialog to display the current clipboard contents.

Press Paste or Merge to paste or merge the displayed image into Galleria.

Press Cancel to exit with the current image unchanged.


ΓòÉΓòÉΓòÉ 7. Image menu ΓòÉΓòÉΓòÉ

The following operations permit changes or edits to be made to the current
image:

o Crop is used to cut a rectangular portion from the current image. A
  size/position rectangle will be displayed to control the area of the image to
  be cut out.

  Position the top left corner of the size/position rectangle and press the
  left mouse button, then stretch the rectangle to the desired size and press
  the left mouse button again. The Crop operation can be aborted by pressing
  the Esc key.

o Mirror will flip the image around the vertical axis for a mirror image of
  that currently displayed.

o Invert will flip the image around the horizontal axis to invert the current
  image.

o Rotate left and Rotate right will turn the image 90 degrees anti-clockwise
  and clockwise respectively. Repeating this operation four times will restore
  the image to its original orientation.

o Enlarge/reduce is used to enlarge or reduce the image size. A dialog box will
  be displayed prompting for new horizontal and vertical dimensions.

o Trim is used to crop the image edges. A dialog is displayed prompting for the
  edges to be trimmed and the trim width.

o Palette is used to change the color of entries in the image palette. A dialog
  box will be displayed.

o Negative will invert all the colors in the image palette. This option would
  normally be used on monochrome images to reverse the black and white areas.

The following options apply to the undo (or reversal) of edits made to the
current image:

o Undo will restore the image to that displayed prior to the last operation
  above.

o Undo all will restore the image to the original as loaded from the clipboard
  or read from disk.

o Undo levels permits setting of the number of undo levels to be retained. Each
  edit operation will require one level. When the number of edit operations
  exceeds the number set, earlier states will be discarded. Avoid setting too
  high a value when editing large images or virtual storage may be exhausted.
  When set to 0, no previous states will be retained.

As an alternative to selecting options from the pull-down menu, click (and keep
depressed) the right mouse button anywhere on the displayed image. The action
will be performed when the mouse button is released over the desired option. If
no action is to be performed, move the pointer away from the popup menu and
then release the mouse button.


ΓòÉΓòÉΓòÉ 7.1. Image enlarge/reduce ΓòÉΓòÉΓòÉ

Use the Image enlarge/reduce dialog to change the size of the image.

The current horizontal and vertical dimensions are shown when the dialog is
invoked. Overtype these values with the new dimensions desired. Alternatively,
move the Proportional scaling slider to the left/right to decrease/increase the
size while retaining the original image proportions.

The horizontal and vertical dimensions may not exceed a value of 4096.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.


ΓòÉΓòÉΓòÉ 7.2. Image trim ΓòÉΓòÉΓòÉ

Use the Image trim dialog to trim the image edges. This permits finer
adjustment in a cropping operation than may be possible with Image crop.

Select one or more edges to be trimmed. A strip of the set width (below) will
be cut from each of the edges selected.

Set the width to be trimmed from the above edges.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.


ΓòÉΓòÉΓòÉ 7.3. Image palette ΓòÉΓòÉΓòÉ

Use the Image palette dialog to change the values of individual colors in the
image palette.

A list of colors is displayed in decreasing order of frequency in the image.
The relative frequencies for each entry is displayed with the currently
selected entry indicated by a marker of the graph. The RGB component values of
the selected entry are represented by the sliders at the right.

To change a color, select that entry from the list and move each slider until
the desired new color is displayed. Any number of colors may be changed.

Note that the palette entries listed are those from the original image and
changes made with this dialog will be applied before any conversions.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.

The Show option has not yet been implemented.


ΓòÉΓòÉΓòÉ 8. Convert menu ΓòÉΓòÉΓòÉ

Use the Convert menu to convert the image to monochrome or grayscale or reduce
the number of distinct colors.

o Original will display the image using the original palette.

o Monochrome will convert the image using black and white colors only. The
  mapping of original colors to either black or white will be governed by the
  settings in the Convert monochrome options dialog.

  Select 2 colors to initiate the conversion.

o Grayscale will convert the image using shades of gray only. The mapping of
  original colors to the respective shade of gray will be governed by the
  settings in the Convert grayscale options dialog.

  Select 16 colors or 256 colors to initiate the conversion.

o Color will map the original colors in the image to either a fixed palette or
  a palette with less colors than the original. This can result in smaller file
  sizes and/or better display with some monitor/adapter combinations. The
  mapping of the original colors will be governed by the settings in the
  Convert color options dialog.

  Select 16 colors to initiate the conversion.

Conversions make take some time to process. To abort the current conversion,
select Original from the Convert menu. Alternatively, select another conversion
type. Changing conversion options will automatically initiate another
conversion if they apply to the current type.

Note that conversions are applied after any edits and prior to the image being
displayed, saved to disk or copied to the clipboard. Unlike Image edit
operations which are cumulative, each conversion will override the last
selected. This permits fine tuning of the results without having to revert to
the previous state.


ΓòÉΓòÉΓòÉ 8.1. Convert monochrome options ΓòÉΓòÉΓòÉ

Use the Convert monochrome options dialog to fine-tune image conversion to
monochrome (black & white).

Select the Conversion technique. Options are Threshold for a simple re-map of
each color to either black or white, or Random dither, Ordered dither or Error
diffusion to dither or digitally halftone the image using dots of black or
white.

Choosing Threshold will give a sharper image but with the loss of the tonal
range of the original. Error diffusion will more accurately preserve the
overall tone. Random dither  or Ordered dither may be more suitable for some
applications.

To fine tune the output, change the relative Color bias percentages to
lighten/darken areas of the image depending on the red/green/blue intensity of
the original. A higher bias will result in a lighter tone for areas of that
color. Additionally, the overall intensity can be changed by setting the
desired Brightness. Position the slider arm at the desired position.

Select Enhance contrast to increase the contrast of the image or Sharpen for
more clearly defined edges.  Sharpen is recommended for Random dither but not
for Ordered dither.

Press Defaults to restore the default values for all settings.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.


ΓòÉΓòÉΓòÉ 8.2. Convert grayscale options ΓòÉΓòÉΓòÉ

Use the Convert grayscale options dialog to fine-tune image conversion to
shades of gray.

Select the Conversion technique. Options are Threshold for a simple re-map of
each color to the closest shade of gray, or Error diffusion to dither or
digitally halftone the image using grays from the new palette. The former
method will result in a sharper image while the latter will more accurately
preserve the overall tone.

To fine tune the output, change the relative Color bias percentages to
lighten/darken areas of the image depending on the red/green/blue intensity of
the original. A higher bias will result in a lighter tone for areas of that
color. Additionally, the overall intensity can be changed by setting the
desired Brightness. Position the slider arm at the desired position.

Select Enhance contrast to increase the contrast of the image or Sharpen for
more clearly defined edges.

Press Defaults to restore the default values for all settings.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.


ΓòÉΓòÉΓòÉ 8.3. Convert color options ΓòÉΓòÉΓòÉ

Use the Convert color options dialog to fine-tune image conversion to a
different or reduced color palette.

Select the Conversion technique. Options are Closest color for a simple re-map
of each color to the nearest color in the new palette, or Error diffusion (fast
or normal) to dither or digitally halftone the image using colors from the new
palette. The latter method will more accurately preserve the overall color of
the original.

The Compute optimum palette option is not yet supported.

Press Defaults to restore the default values for all settings.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.


ΓòÉΓòÉΓòÉ 9. Window menu ΓòÉΓòÉΓòÉ

Use the Window menu to control the image display.

o Size to fit will resize the window to fit the displayed image.

o The Scale to window setting determines the current image magnification. When
  set, the image will be scaled to fit within the window. When not set, the
  image will be displayed full-size and scroll bars can be used to move the
  non-displayed portions of the image into view. This option can be toggled on
  or off.

  The current display magnification is shown as a percentage in the information
  area.

o The Information area setting will toggle on or off display of the information
  area at the bottom of the window.

o Background permits the window background color and pattern to be changed. A
  dialog box will be displayed prompting for color and pattern.


ΓòÉΓòÉΓòÉ 9.1. Window background ΓòÉΓòÉΓòÉ

Use the Window background dialog to change the color and pattern of the window.

Select the desired color and/or pattern from the set displayed. The currently
selected values are shown with a boxed border.

Press OK to accept these changes or Cancel to ignore changes and exit with the
original settings.


ΓòÉΓòÉΓòÉ 10. Help menu ΓòÉΓòÉΓòÉ

Use the Help menu for display of help information and product information.

o Help index will display and index of the help topics available.

o General help will display a general description of the program.

o Using help will display instructions on use of the help facility.

o Product information will display copyright and version information for the
  program.

o License information will display licensing information.


ΓòÉΓòÉΓòÉ 11. Alternative file dialogs ΓòÉΓòÉΓòÉ

Galleria supports two sets of file dialogs, Standard and Alternative

The Alternative dialogs offer the following:

o Multi-threaded operation, thus retaining the ability to interact with the
  dialog or other applications while the file list is being built.

o Emphasis on display of file names. This permits more files to be visible at
  one time and better display of the long names possible with HPFS disks.

  When multiple directory changes are necessitated, the File search dialog may
  prove more efficient in locating the desired file.

o Specification of a set of file extensions to restrict the display of files
  when no extension is specified. This permits all relevant files (with
  differing extensions) to be easily isolated from the remainder in large
  directories.

Select Preferences from the File pull-down menu to select Standard or
Alternative file dialogs.


ΓòÉΓòÉΓòÉ 12. Supported file formats ΓòÉΓòÉΓòÉ

The following file formats are supported by this version.

These file formats are supported for import (open):

o BMP - IBM OS/2 1.x bitmap

   Standards: Bitmap or Bitmap Array (first image only)
   Bits: 1, 4, 8 or 24
   Planes: 1

o BMP - IBM OS/2 2.x bitmap

   Standards: Bitmap or Bitmap Array (first image only)
   Bits: 1, 4, 8 or 24
   Planes: 1
   Compression: None, RLE4 or RLE8

o BMP - Microsoft Windows 3.x bitmap

   Standards: Bitmap or Bitmap Array (first image only)
   Bits: 1, 4, 8 or 24
   Planes: 1
   Compression: None, RLE4 or RLE8

o EPS - Encapsulated Postscript (TIFF preview)

   Standards: As per Tagged Image File Format

o GIF - CompuServe Graphics Interchange Format

   Standards: GIF87a or GIF89a, single or multi-image, interleaved or
   non-interleaved
   Bits: 1 to 8

o IFF - Amiga Interchange Format Files

   Standards: Non-masked
   Bits: 1 to 8
   Compression: None, RLE

o IMG - Digital Research GEM

   Standards: Monochrome

o MAC - Apple MacPaint

   Standards: Monochrome, with or without header

o MET - OS/2 metafile

o MSP - Microsoft Paint

   Standards: Monochrome

o PCD - Kodak Photo CD

   Standards: Base/16, Base/4, Base
   Bits: 8 (grayscale), 24

o PCX - ZSoft Paintbrush

   Standards: Version 2.8, 3.0
   Bits: 1 to 8
   Planes: 1, 4 (with 1 bit per pixel) or 3 (RGB)

o TGA - AT&T Targa-16/24/32

   Standards: Type 1, 2, 3, 9, 10 and 11, non-interleaved
   Bits: 1 to 8 (color-mapped) or 16, 24, 32 (RGB)
   Compression: None, RLE

o TIF - Tagged Image File Format

   Standards: Version 4.0, 5.0 (TIFF B, G or P), Intel or Motorola byte
   ordering, first image only
   Bits: 1 to 8
   Planes: 1
   Compression: None, Huffman (CCITT 1D), Packbits or LZW

o WPG - WordPerfect graphic

   Standards: Version 5.0, 5.1, bitmap only
   Bits: 1 to 8

These file formats are supported for export (save):

o BMP - IBM OS/2 1.x bitmap

   Bits: 1, 4 or 8
   Planes: 1

o BMP - IBM OS/2 2.x bitmap

   Bits: 1, 4 or 8
   Planes: 1
   Compression: None

o BMP - Microsoft Windows 3.x bitmap

   Bits: 1, 4 or 8
   Planes: 1
   Compression: None

o GIF - CompuServe Graphics Interchange Format

   Standards: GIF87a
   Bits: 1 to 8

o PCX - ZSoft Paintbrush

   Standards: Version 2.8, 3.0
   Bits: 1 or 8
   Planes: 1, 4 (with 1 bit per pixel)

o TGA - AT&T Targa-24

   Standards: Type 9
   Bits: 8
   Compression: RLE

o TIF - Tagged Image File Format

   Standards: Version 4.0, 5.0 (TIFF B or P), Intel byte ordering
   Bits: 1, 4 or 8
   Planes: 1
   Compression: Packbits

o WPG - WordPerfect graphic

   Standards: Version 5.0
   Bits: 1, 4 or 8

Note that (for all formats other than OS/2 metafiles and Photo CD) Galleria
ignores the file name extension when importing or exporting files. When a file
is read, the format is determined by examining header information contained
within the file.


ΓòÉΓòÉΓòÉ 13. Galleria/CM support ΓòÉΓòÉΓòÉ

Galleria can be integrated with Galleria/CM for immediate post-processing of
images captured from the desktop.

Simply select the Editor destination in the main Options dialog. Subsequent
captures will result in Galleria being invoked with the captured image
displayed. A new Galleria window will appear for each capture.

Note that GALLERIA.EXE must reside in the same directory as GALLERCM.EXE and
the LIBPATH statement in CONFIG.SYS must contain an explicit entry for the
directory in which the Galleria and Galleria/CM DLLs reside.


ΓòÉΓòÉΓòÉ 14. Problems and diagnostics ΓòÉΓòÉΓòÉ

If the Galleria process detects an internal or external processing error, the
program will terminate.

To determine the cause of the error, restart Galleria with the -d switch
parameter (on the command line or as a parameter in the session settings) and
reproduce the sequence of events up to the failure.

This will log error information to a file GALLERIA.LOG in the same directory as
the executable. This file contains information which can be used to resolve
problems. Please record the program version number and symptoms (what action
was being performed at the time of the error) and return this information
together with the contents of GALLERIA.LOG so that the problem can be resolved.

Note that this log file will be over-written each time Galleria is started with
the -d switch. There is no performance penalty incurred in use of this error
logging facility.

Also, if Galleria should fail to read and/or display a file specifically
documented as being supported, please send this file to the address below on a
3.5 inch floppy disk (together with information on program version number,
hardware configuration etc). An updated version of Galleria will be returned.

Please send error reports or unsupported files to:

Bitware, Software & Services
P.O. Box 3097
Manuka  A.C.T.  2603
Australia


ΓòÉΓòÉΓòÉ 15. How to register ΓòÉΓòÉΓòÉ

This copy of Galleria is provided with a limited evaluation license not
exceeding 21 days in duration from first use. Unregistered use beyond this
evaluation period is in violation of this license, as is use for any commercial
purpose prior to registration.

If you find Galleria useful and would like to register this software, a license
fee is payable. Registration of this software will entitle you (or your
corporation) to unlimited use of current and subsequent releases of the
product(s) plus best-effort support via CompuServe.

Two license types are available: individual and corporate. An individual
license is for the sole use of the named individual. A single corporate license
entitles use by all employees/members of the named corporation/institution.

A software key made out in the name of an individual or corporation is returned
when the software is registered. Please indicate the license type required.

How to register Galleria:

o Send a mail message to CompuServe 100033,340 with your credit card details
  (card number, full name on card and expiry date). The following cards are
  accepted: Mastercard, Visa and Amex.

  A software key for enablement of unlimited use will be returned to your
  CompuServe id.

o Send a fax to [phone] with credit card particulars.

  The current version plus software key will be sent on 3.5 inch floppy to the
  address you specify. Delivery (by airmail) is normally 2 weeks from receipt
  of order. A shipping & handling charge will apply.

o Post either credit card particulars or a cheque/check for the appropriate
  registration fee (in Australian currency or converted equivalent) to:

    Bitware, Software & Services
    P.O. Box 3097
    Manuka  A.C.T.  2603
    Australia

  The current version plus software key will be sent on 3.5 inch floppy to the
  address you specify. Delivery (by airmail) is normally 2 weeks from receipt
  of order. A shipping & handling charge will apply.

o Purchase orders (on company letterhead) will be accepted for corporate
  license ONLY. Please include a contact name and fax number for queries. Fax
  your order to [phone], or post to:

    Bitware, Software & Services
    P.O. Box 3097
    Manuka  A.C.T.  2603
    Australia

  The current version plus software key will be sent on 3.5 inch floppy to the
  address you specify. Delivery (by airmail) is normally 2 weeks from receipt
  of order. A shipping & handling charge will apply.

See the README.DOC file for further information. Current pricing is detailed in
the ORDER.DOC file.